HDMI 2 x 2 , 3D 4K x 2K , Matrix
INTRODUCTION
HDMI Matrix is a perfect matrix product with detached external audio output ports, which can connect 2 different HDMI signal sources and 2 displays. It can easily switch any of 2 input signals to 2 displays by using remote control or pushing button. The output signals can be same or different. By using this product can avoid the need to disconnect and reconnect signal sources to displays frequently. It can smartly select input signal sources with priority order and jump over those input signal sources which are not in work. It can optimize your home theatre system to the best effect.
TECHNICAL PARAMETERS
| HDMI Source Input Port |
2 |
| Display Device Output Port |
2 |
| Source Port Connector |
HDMI 19PIN |
| Display Device Port Connector |
HDMI 19PIN |
| HDCP Compliant |
YES |
| Single Link Range |
3840x2160 |
| Input Video Signal |
0.5-1.0 Volts P-P |
| Input DDC Signal |
5 Volts P-P(TTL) |
| Deep Color |
36bit |
| HDMI Version |
HDMI1.4 |
| Bandwidth |
Up to 340Mhz |
| Signal Speed |
Up to 10.2Gbps |
| The length of input cable |
PS3≤15M；BLUE DVD≤15M |
| The length of output cable |
≤25M |
| The cable standard |
26AWG HDMI1.4 |
| Vertical Frequency Range |
30Hz |
| Power Consumption(max.) |
5Watts |
| Operation Temperature |
0℃-70℃ |
| Working Voltage |
DC 5V |
| Power Adaptor |
5V 1A |
| Net Weight |
0.3Kg |
| Dimension: L*W*H(mm) |
150x64x25 |
FEATURES
1. Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
2. 3D HDMI 1.4a video format support.
3. 3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.
4. Supports deep color up to 48-bit per pixel.
5. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
6. Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
EDID -----------------------------------EDID selector button
IR ----------------------------------------------------IR receiver
B2~B1 ---------------------------------------Output B Status
OUT B Select ------------------------------Output B Select
A2~A1 ---------------------------------------Output A Status
OUT A Select ------------------------------Output A Select
Power -------------------------------------------Power Status
ON/OFF ----------------------------------------Power switch
DC/5V --------------------------------------------Power Input
HDMI Input1~2 --------------------------HDMI Input ports
HDMI Output A~B --------------------HDMI Output ports
SPDIF ---------------------------------Digital Audio Output
Stereo --------------------------------Analog Audio Output
CONNECTION DIAGRAM
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect the HDMI from source(DVD, HD Player,PC) to matrix.(Input
cables are optional).
2. Connect the HDMI output from to the TV which has HDMI input.
3. Insert the DC side of 5V power supply into and then connect the AC
side of the power supply into the wall outlet.
4. Power on the source and TV, choose the input of TV to its HDMI
channel.
5. The image does not need to be adjusted, the matrix will position it
automatically, the user may adjust the horizontal position under
some extreme condition.
6. Select the working mode of the matrix via the remote control or
panel button.
