HDMI 4 X 4 , 4K X 2K , 3D , Matrix
INTRODUCTION
HDMI Matrix is a perfect matrix product with detached external audio output ports, which can connect 4 different HDMI signal sources and 4 displays. It can easily switch any of 4 input signals to 4 displays by using remote control or pushing button. The output signals can be same or different. By using this product can avoid the need to disconnect and reconnect signal sources to displays frequently. It can smartly select input signal sources with priority order and jump over those input signal sources which are not in work. It can optimize your home theatre system to the best effect.
TECHNICAL PARAMETERS
| HDMI Source Input Port |
4 |
| Display Device Output Port |
4 |
| Source Port Connector |
HDMI 19PIN |
| Display Device Port Connector |
HDMI 19PIN |
| HDCP Compliant |
YES |
| Single Link Range |
3840x2160 |
| Input Video Signal |
0.5-1.0 Volts P-P |
| Input DDC Signal |
5 Volts P-P(TTL) |
| Deep Color |
36bit |
| HDMI Version |
HDMI1.4 |
| Bandwidth |
Up to 340Mhz |
| Signal Speed |
Up to 10.2Gbps |
| The length of input cable |
PS3≤15M；BLUE DVD≤15M |
| The length of output cable |
≤25M |
| The cable standard |
26AWG HDMI1.4 |
| Vertical Frequency Range |
30Hz |
| Power Consumption(max.) |
15Watts |
| Operation Temperature |
0℃-70℃ |
| Working Voltage |
DC 12V |
| Power Adaptor |
12V 2A |
| Net Weight |
0.8kg |
| Dimension: L*W*H(mm) |
300*181*25 |
FEATURES
1. When its 4 input ports are separately connected to 4 signal sources
with HDMI cables, the HDMI Matrix automatically recognizes the last
connected port and switches its input signal to 4 displays.
2. The needed input signal sources must be selected by using remote
control or pushing button in order to make 4 displays showing 4 different
signals.
3. Support HDMI 1.4,HDCP1.4;
4. Support high resolutions up to 4Kx2K, including 480i/p, 576i/p,
720i/p, 1080i and 1080p,3840x2160@25/30Hz.
5. Metal casing design and overall shielding without signal interference.
6. Use remote control or push button to freely select input source.
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
OUT A-------------------------------------------------Output A Select
A1-A4---------------------------------------------Output A1-4 Status
OUT B-------------------------------------------------Output B Select
B1-B4---------------------------------------------Output B1-4 Status
OUT C------------------------------------------------Output C Select
C1-C4--------------------------------------------Output C1-4 Status
OUT D------------------------------------------------Output D Select
D1-D4--------------------------------------------Output D1-4 Status
IR------------------------------------------------------IR Receiver port
RS232---------------------------------------------------RS232 port
EDID----------------------------------------------EDID setting port
DC 12V---------------------------------------DC power Input port
HDMI OUT A ----------------------------------------Output port A
HDMI OUT B ----------------------------------------Output port B
HDMI IN 1-4 ---------------------------------------HDMI Input 1-4
HDMI OUT C ----------------------------------------Output port C
HDMI OUT D ----------------------------------------Output port D
ON/OFF ----------------------------------------------Power Switch
CONNECTION DIAGRAM
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect the HDMI cable between signal source and input port of Matrix.
2. Connect the HDMI cable between output port of Matrix and HDTV.
3. Connect Matrix and power adapter.
4. Open the signal source and the power of HDTV, then it works.
EDID SELECTOR
| Number |
EDID Selector |
Function |
| 1 |
000 |
3D 4Kx2K 2CH(Note 1) |
| 2 |
001 |
3D 1080P stereo 2CH (Note 2) |
| 3 |
010 |
2D 1080P stereo 2CH (Note 3) |
| 4 |
011 |
2D 1080I stereo 2CH (Note 4) |
| 5 |
100 |
2D 1080P 5.1CH(Note 5) |
| 6 |
101 |
2D 1080P 7.1CH(Note 6) |
| 7 |
110 |
3D 1080P stereo 2CH (Note 7) |
| 8 |
111 |
2D 1080P DVI(Note 8) |
1. The matrix use the embedded 4Kx2K stereo 2ch EDID When the DIP
switch is in this mode.
2. The matrix use the embedded 1080P stereo 3D compatible EDID
When the DIP switch is in this mode.
3. The matrix use the embedded 1080P stereo 2ch EDID When the
DIP switch is in this mode.
4. The matrix use the embedded 1080I stereo 2ch EDID When the
DIP switch is in this mode.This setting can be used when the TV set is
an old model that can not support 1080P.
5. The matrix use the embedded 1080P-5.1 EDID When the DIP switch
is in this mode.
6. The matrix use the embedded 1080P-7.1 EDID When the DIP switch
is in this mode.
7. The matrix use the embedded 1080P-2.0 3D EDID When the DIP
switch is in this mode.
8. The matrix use the embedded 1080P-2.0 2D DVI When the DIP switch
is in this mode.
