HDMI 4 x 4 , 4K x 2K , 60Hz , Matrix

HDMI 4 x 4 , 4K x 2K , 60Hz , Matrix

INTRODUCTION

HDMI Matrix is a perfect matrix product with detached external audio output ports, which can connect 4 different HDMI signal sources and 4 displays. It can easily switch any 1 or 2 of 4 input signals to 4 displays by using remote control or pushing button. The output signals can be same or different. By using this product can avoid the need to disconnect and reconnect signal sources to displays frequently. It can smartly select input signal sources with priority order and jump over those input signal sources which are not in work. It can optimize your home theatre system to the best effect.

FEATURES

1.When its 4 input ports are separately connected to 4 signal sources
with HDMI cables, the HDMI Matrix automatically recognizes the last
connected port and switches its input signal to 4 displays;

2.The needed input signal sources must be selected by using remote
control or pushing button in order to make 4 displays showing 4 different
Signals;

3.Support HDMI2.0,HDCP2.2;

4. Support video format up to 4k2k@60Hz with 24bit RGB/YcbCR
4:4:4/YCBCR4:4:4,and up to 4k2k@60Hz with 12bit YCBCR 4:4:4;

5. Switch easily between any 4 HDMI sources.

6. The 4 displays can get the same or different signals without mutual

interaction.

PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.

OUT A-------------------------------------------------Output A Select
A1-A4---------------------------------------------Output A1-4 Status
OUT B-------------------------------------------------Output B Select
B1-B4---------------------------------------------Output B1-4 Status
OUT C------------------------------------------------Output C Select
C1-C4--------------------------------------------Output C1-4 Status
OUT D------------------------------------------------Output D Select
D1-D4--------------------------------------------Output D1-4 Status
IR------------------------------------------------------IR Receiver port
RS232------------------------------------------------------RS232 port
EDID------------------------------------------------EDID setting port

DC 12V---------------------------------------DC power Input port
HDMI OUT A ----------------------------------------Output port A
HDMI OUT B ----------------------------------------Output port B
HDMI IN 1-4 ---------------------------------------HDMI Input 1-4
HDMI OUT C ----------------------------------------Output port C
HDMI OUT D ----------------------------------------Output port D
ON/OFF ----------------------------------------------Power Switch

CONNECTION DIAGRAM

Before installation, please make sure all devices you wish to connect have been turned off.

1. Connect the HDMI cable between signal source and input port of Matrix.

2. Connect the HDMI cable between output port of Matrix and HDTV.

3. Connect Matrix and power adapter.

4. Open the signal source and the power of HDTV, then it works.

EDID Selector: Select HDMI output signal format via EDID Selector.